Presenting Flying Ford AngliaTM!

RSS

Flying Ford Anglia^TM

Assemble me. Buckle up for a magical flight!

Ugears is pleased to bring a unique automotive model to Harry Potter fans—the Flying Ford Anglia^TM, a car with a mind of its own.

The Ugears Flying Ford Anglia^TM has a spring drive that transmits torque to the rear wheels, providing drive power. The car can travel 3-4 meters on a single wind-up of the ratchet mechanism located on the undercarriage.

The spring drum is safely tucked under the model car's seats, while the authentic rear license plate functions as the start/stop button. There is also a neutral gear that lets the car roll freely.

The front wheels rotate 25 degrees in either direction and can be turned using the steering wheel or by pressing the wheels themselves, allowing the car to travel in a straight line or turn circles (you are in charge of making the Anglia fly!). The car rides on any flat surface, from carpet to slippery tile, thanks to the grippy rubber band "tires" encircling all wheels.

Ugears Flying Fort Anglia

You can manually open the doors, trunk, and hood of the Flying Ford Anglia^TM. The open hood (or "bonnet" in the UK) reveals engine details, while the trunk (or "boot") is large enough to accommodate Harry's model suitcases with laser-engraved Hogwarts crest.

Ugears Flying Fort Anglia

But here's where the real magic comes in: thanks to a special mechanism attached to the spring-loaded shaft running through the cabin, the Anglia has a secret "ejection" function.

When the front license plate is pressed, the trunk and side doors pop open while the tilting front seats and a lever in the trunk dramatically throw all passengers and contents from the vehicle.

Place Harry's suitcases in the trunk, press the front plate, and watch as they are unceremoniously ejected by the angry Anglia!

102-Ugears-Flying-Ford-Anglia

The Flying Ford Anglia^TM DIY wooden model has 246 parts, is rated "middle" difficulty level, and has an estimated assembly time of 6 hours. To assemble, simply remove the pieces from the laser pre-cut boards and snap them together following the detailed, illustrated instructions. Instructions are available in 11 languages.

102-Ugears-Flying-Ford-Anglia

No glue or special tools are required—everything you need for assembly is included in the box. Be sure to use the included sandpaper and wax to smooth and lubricate the moving parts, for optimal function.

Model size: 8.9*3.3*3.1 in (22.5*8.5*8 cm)

Package size: 14.9*6.7*1.1 in (37.8*17*2.8 cm)

Number of components: 246

Estimated time for assembly: 6 hours

102-Ugears-Flying-Ford-Anglia

← Previous Post Next Post →

Sep 14, 2022
Veronika G

Comments 3

Frank Burke

Dec 14, 2022

I used to have one of these vechiles and drove from Perth to Melbourne on dirt roads which we called bull dust it was so fine that it penatrated our suite cases even though the sides of the cases where sealed with tape A long and dry trip. Kind regards Frank Burke .
Bob Fantetti

Dec 14, 2022

Or how about a 1957 Chevy or-any style of the Corvette?? Just a thought 💭
Bob Fantetti

Dec 14, 2022

I have purchased many of your products which I have learned are far better than your cheaper competitors-I wondering if you have thought about making a gum ball kit which I think would do very well-their are many kinds some are square and some are round ?? Thank you-Bob